Payment & Shipping Terms:
|Usage:||Outdoor||Pixels:||4mm 5mm 6mm 8mm 10mm|
|Model Number:||P4 P5 P6 P8 P10||LED Chip:||Epistar|
led outdoor advertising screens,
outdoor advertising led display screen
Digital Electronic Big LED Frame Display Screen Full Color P6 P8 P10 P16 for Advertising
Outdoor LED Advertising Screen Parameter:
Normal Waterproof Iron Cabinet Dimension:
640mm x 640mm
768mm x 768mm
800mm x 800mm
960mm x 960mm
1. IP65 Level Waterproof,
2. High Quality Power and Control Card.
3. Standard cabinet size: 960mm*960mm, Depends the Display size,
4. Highly effective & quick for transportation and screen assembling
5. SMD black light, wider viewing angle, high-contrast(5000:1),soft image
6. Special buckles structural connection between the cabinets,don’t need other tools
7. Cabinets are in common use for standard modules,shorten production cycle
|Pixel Pitch||10 mm||LED Encapsulation||SMD3535/1R1G1B|
|LED Chips||Epistar||Module resolution||32dots*16dots|
|Module size||320mm*160mm||Pixel density||27777dots/m²|
|Cabinet size||960mm*960mm||Cabinet resolution||160dots*160dots|
|Drive Method:||1/4scanning||Brand of power supply||CL 5V~40A|
|The best viewing angle||
|Max Power Consumption||900W/ m²||Control Mode||
|Optimal Viewing Distance||≥10m||Brightness||≥6500cd/m²|
|Blind Spot Rate||<0.0001||Brightness Control||0-255 Grade|
|Contrast||100 levels adjustable||Earth Leakage Current||<2mA|
|Power Supply Mode||
Usage Considerations of LED Display
1) screen switching sequence:
on: first turn on the computer, then screen
off: first shut off screen, then computer.
2) Interval of switching LED display must be greater than 1 minute.
2. Ambient temperature
When ambient temperature is too high or cooling condition is bad, users had better not to turn on the screen for a long time.
Screen shall be installed in temperature from-10 °C to 40 °C.Over environment temperature range, temperature control equipment must be installed.
It is forbidden to install LED display near any heat source.
When installing screen, ambient relative humidity should be in the range from 30% to 70%.It is prone to get static electricity when the indoor humidity is below 30%;
when the indoor humidity is higher than 70%, electronic components are easy to get damp.
4.Corrosive gas environment
Please do not install the display in corrosive gas environment containing acid or base components, such as chemical warehouse.
5. Electromagnetic radiation environment
Please do not install display when electromagnetic radiation and radio frequency radiation environment is over field strength 5V/m.
If necessary, isolation treatment should be taken.
6.Steady power supply
If necessary, users have to install surge switches in the distribution box and ground fault protection to avoid lightning strikes.
Do not use the display in strong lightning and other severe weather.
7. Conductive material is strictly prohibited to contact display, such as metal dust and water.
Screens are placed in the environment of low dust as far as possible, otherwise it will affect the display effects, as well as damage the circuit.
If exposed to water for various reasons, please immediately power down until the screen unit dry.
Do not display a long time in a white, red, green, blue or other bright screen, because this will affect the display lifetime.
LED display at least rest 2 hours a day. Normally turn on the screen at least twice a week or more (Especially in the rainy season it is necessary to turn on the display every day).
And it maintains more than 2 hours every time.
LED display requires regular inspection to check circuit damage. If it does not work, change it in time. If circuit damages, it should be repaired or replaced.
Users must ensure safety while installing Led display. The factory only offers products and reference programs of frame fixation.
Users can ask relevant authorities to confirm according to local conditions and field conditions.
Contact Person: Candy Xu